จำนวนชิ้น | ส่วนลดต่อชิ้น | ราคาสุทธิต่อชิ้น |
{{(typeof focus_pdata.price_list[idx+1] == 'undefined')?('≥ '+price_row.min_quantity):((price_row.min_quantity < (focus_pdata.price_list[idx+1].min_quantity - 1))?(price_row.min_quantity+' - '+(focus_pdata.price_list[idx+1].min_quantity - 1)):price_row.min_quantity)}} | {{number_format(((focus_pdata.price_old === null)?focus_pdata.price:focus_pdata.price_old) - price_row.price,2)}} บาท | {{number_format(price_row.price,2)}} บาท |
คงเหลือ | ไม่จำกัด ชิ้น |
จำนวน (ชิ้น) |
- +
|
ซื้อเลย หยิบลงตะกร้า ซื้อเลย หยิบลงตะกร้า คุณมีสินค้าชิ้นนี้ในตะกร้า 0 ชิ้น
|
|
|
|
คุยกับร้านค้า | |
{{ size_chart_name }} |
|
หมวดหมู่ | EMC Power Supply |
สภาพ | สินค้าใหม่ |
เพิ่มเติม | |
สภาพ | สินค้ามือสอง |
เกรด | |
สถานะสินค้า | |
ระยะเวลาจัดเตรียมสินค้า | |
เข้าร่วมโปรโมชั่น | |
ข้อมูล |
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
|
รายละเอียดสินค้า |
EMC VNX5700, VNX7500 & CX3-80 2200W 2U SPS Replacement Battery 078-000-050 / 100-809-008SPS Pros is dedicated to providing top quality standby power supplies to keep your EMC storage array running smoothly. This particular model with part numbers 078-000-050 & 100-809-008, is used by the EMC VNX5700, VNX7500 & CX3-80 when the 4U DAE is used as a Vault drive. All EMC SPS units are fully refurbished with brand new battery cores and come with a 60 day warranty. EMC VNX7500, VNX5700 & CX3-80 Standby Power Supply (SPS) Replacement Battery 078-000-050 / 100-809-008As shown in Figure 1, the VNX5700, VNX7500 & CX3-80 SPE uses two 2.2-kilowatt 2U SPSs to maintain power to the storage system during a power loss; this allows a full dump of the write cache to a reserved area on the persistent disk. In the case of the 078-000-050, SPS power output connectors are used to power the SPE as well as to power the first DAE on the first back-end loop. ![]() Figure 1. View of 078-000-050 / 100-809-008 Standby Power Supply (SPS)It is important to cable each SPS so it connects completely to either the A side or the B side. For example, if you are looking at the SPS from the back, they should be configured as follows:
If an SPS is cabled with the SPS sense cable going to SP A and the power-out cable going to power supply B (or vice versa), error conditions are displayed when the SPS is tested while it is charging. ........................... ![]() |
เงื่อนไขอื่นๆ |
|
Tags |